Quantity In Stock: 5+
Fitment
The Axiom Supply AX513084 Wheel Bearing & Hub Assembly is a direct-fit front wheel hub replacement for select Jeep Wrangler YJ and early TJ, Cherokee XJ, Comanche MJ, Grand Cherokee ZJ, and Wagoneer applications.
Designed as a complete bolt-in assembly for the front driver or passenger side.
Jeep Cherokee (XJ)
1989–1999 Jeep Cherokee XJ — Front
Jeep Comanche (MJ)
1990–1992 Jeep Comanche MJ — Front
Jeep Grand Cherokee (ZJ)
1993–1998 Jeep Grand Cherokee ZJ — Front
Jeep Grand Wagoneer
1993 Jeep Grand Wagoneer — Front
Jeep Wagoneer
1990 Jeep Wagoneer — Front
Jeep Wrangler YJ
1990–1995 Jeep Wrangler YJ — Front
Jeep Wrangler TJ
1997–1998 Jeep Wrangler TJ — Front
1999 Jeep Wrangler TJ — See Important Fitment Note Below
Important 1999 Wrangler TJ Fitment
1999 Jeep Wrangler TJ is a split-year application and uses two different front wheel hub assemblies depending on the brake rotor design.
Composite Brake Rotors: AX513084
Full-Cast Brake Rotors: AX513158
Before ordering for a 1999 Wrangler TJ, verify which brake rotor configuration is currently installed on the vehicle.
Fitment Notes
Fits the front driver or passenger side.
Direct replacement for the corresponding factory-style front hub and bearing assembly.
One wheel bearing and hub assembly is required per side.
Features the factory-style 5×4.5-inch / 5×114.3 mm wheel bolt pattern with 1/2"-20 wheel studs.
Features
Precision Bearing Assembly — Engineered for smooth wheel rotation, consistent preload, and dependable performance under demanding on-road and off-road conditions.
High-Performance Grease — Premium lubricant helps protect the internal bearing surfaces against heat, friction, moisture, and contamination.
Heavy-Duty Hub Construction — Proprietary hub and bearing structure is designed to reduce hub-face deflection under load and maintain consistent wheel support.
Premium Grade 8 Wheel Studs — Cold-formed, zinc-plated wheel studs provide excellent tensile strength and corrosion resistance.
5×4.5 Factory-Style Configuration — Equipped with a 5×114.3 mm bolt pattern and 1/2"-20 wheel studs for direct compatibility with applicable factory wheel configurations.
Direct Bolt-In Design — Complete hub and bearing assembly installs in the factory location without modification when used on the correct application.
Driver or Passenger Side — One hub fits either front position on applicable Jeep models.
Built for Modified Jeeps — Designed to handle the increased loads associated with larger tires, lifted suspension systems, off-road driving, and demanding trail use.
Description
The Axiom Supply AX513084 Wheel Bearing & Hub Assembly is engineered for Jeep owners who demand dependable performance both on the road and off it.
Older Jeep platforms such as the Wrangler YJ and TJ, Cherokee XJ, Comanche MJ, and Grand Cherokee ZJ are commonly subjected to larger tires, suspension lifts, rough terrain, and increased front-end loads. These modifications and operating conditions can place significant stress on the factory wheel bearing and hub assembly.
The AX513084 is built around a heavy-duty proprietary bearing and hub structure designed to minimize hub-face deflection under load. A more stable hub assembly helps maintain consistent steering response, braking stability, wheel control, and long-term bearing durability.
Internally, the bearing assembly utilizes high-performance grease to help reduce friction and protect critical bearing surfaces against heat, moisture, and contamination.
Premium Grade 8 cold-formed wheel studs provide dependable wheel retention, while zinc plating helps protect the hardware against corrosion caused by water, mud, road salt, and harsh operating environments.
The AX513084 installs as a complete bolt-in front wheel bearing and hub assembly and fits either the driver or passenger side. No modification is required when installed on the correct vehicle application.
Whether your Jeep is a daily-driven Cherokee, a restored YJ, a trail-built TJ, or a heavily modified off-road rig, the AX513084 delivers the strength, precision, and longevity expected from an Axiom Supply wheel bearing assembly.
Includes
(1) Axiom Supply AX513084 Front Wheel Bearing & Hub Assembly
Factory-style 5×4.5 / 5×114.3 wheel bolt pattern
1/2"-20 Grade 8 wheel studs
Sold Individually — One hub required per side
Torque Specifications
Axle Nut: 175 lb·ft
Hub / Spindle Bolts: 75 lb·ft
Caliper Slide Pin Bolts: 11–13 lb·ft
Main Caliper Bolts: 100–120 lb·ft
Lug Nuts: 80–100 lb·ft
Always follow the appropriate factory service procedure and verify the specifications for the specific vehicle before installation.
Use a calibrated torque wrench for final tightening.
Complete Installation Guide:
https://axiomsupply.com/pages/jeep-yj-tj-wheel-bearing-torque
Interchange
Axiom Supply
AX513084
Timken
513084
SKF
BR930014
NTN / BCA
WE61169
FAG
559347
Raybestos
713084
GMB
7200009
720-0009
Centric
400.58001E
Chicago Rawhide / CR
BR930014
Dorman
951-015
4110307
DriveTech America
NT513084
Mevotech
H513084 — Supreme
G513084
Part numbers are provided for application cross-reference. Always verify the vehicle year, model, front axle configuration, and—on 1999 Wrangler TJ models—the brake rotor design before ordering.
The Axiom No-Nonsense Lifetime Warranty
Our wheel bearing and hub assemblies are warrantied for life to the original purchaser against manufacturer defects, premature wear, or breakage.
Push it to the limit—we don’t care.
If the part lets you down, we’ll make it right.